DEFAULTING DVRS & NVRS

Defaulting DVRS:

AVZ316/2017, AVZ308/1009, AVZ404, DGD1304, DGD1008, DGD1316

1. Switch Off DVR

2. Take of the the Top Panel of DVR

3. Find the 2 holes labeled HT1 and HT2

4. Once you have found those 2 holes take a Paperclip or Tweezers and bridge those 2 holes

5. While bridging those 2 Holes switch DVR on 

6. Keep the 2 holes bridged while dvr switching on wait till you hear 2 beeps , once you heard two beeps remove the Tweezers or Paperclip

7. It Should be defaulted now and you can access dvr using admin admin

AVZ8136, DGD8132:

1. With these models there is no need to take off the panels , there is a hold at the back of the dvr

2. Take a pin and place it in the hole and push there is a button in the hole keep it there till you see it saying defaulting

3. If that does not work take of the back cover of the dvr and press the button this should work there after.

4. If this did not work please bring dvr to the nearest ISD STORE so we may assist you in defaulting the dvr.

Defaulting NVRS:

AVH8516 , AVH8536, DGH8536

1. With these models there is no need to take off the panels , there is a hold at the back of the dvr

2. Take a pin and place it in the hole and push there is a button in the hole keep it there till you see it saying defaulting

3. If that does not work take of the back cover of the dvr and press the button this should work there after.

4. If this did not work please bring dvr to the nearest ISD STORE so we may assist you in defaulting the dvr.

AVH517, AVH1109, DGH1109, AVH2116, DGH1104, AVH1104

1. Switch Off DVR

2. Take of the the Top Panel of DVR

3. Find the 2 holes labeled HT1 and HT2

4. Once you have found those 2 holes take a Paperclip or Tweezers and bridge those 2 holes

5. While bridging those 2 Holes switch DVR on 

6. Keep the 2 holes bridged while dvr switching on wait till you hear 2 beeps , once you heard two beeps remove the Tweezers or Paperclip

7. It Should be defaulted now and you can access dvr using admin admin